MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 82 of 138
It is forbidden, in any case, to touch live
electrical conductors.
4.9.4 Noise and vibrations
The manufacturer declares that the aerial platforms have
been tested according to the parameters of the European
standard 2000/14/CE, indicating a guaranteed sound
power level shown on the CE Declaration of Conformity
of the machine. During the phases of use of the machine
for aerial operations, this value is further reduced due to
the use of basket away from the source of main noise.
The values of the vibrations transmitted to the operator
both via the controls and directly from the basket floor
are lower than the maximum allowed limits of 0.5 m/s
2
.