CMC S28 - Safety rules during maintenance

MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 101 of 138
Check that there is no
trace of clashes on
the equipment.
It is strictly
forbidden to use
the MEWP.
Contact the
Service.
C.M.C.
8.2 Weekly maintenance (or every
40 hours)
Operations
If negative
result:
by
Check the absence
of splits, cracks,
rust on the MEWP
counter frame (use
torches or lamps to
inspect the internal
part under the frame).
It is
strictly
forbidden to
use the
MEWP.
Contact the
Service.
C.M.C.
Check the
cleanliness of the
endothermic engine
and auxiliary motor*
air filters.
Replacement.
USER/
C.M.C.
Check the
cleanliness of the
hydraulic filters.
Replacement.
USER/
C.M.C.
8.3 Monthly maintenance (or every
120 hours)
Operations
by
Greasing of pins and movable parts.
USER /
CMC
Washing of the equipment.
USER /
CMC
Check the tightening of the bolts of the
bearing, the geared engine and the
frame.
USER /
CMC
8.4 Quarterly maintenance (or
every 300 hours)
Operations
by
Check the tightening of the bolts of the
bearing, the geared engine and the
frame.
USER /
CMC