MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 95 of 138
7 Hydraulic system
The MEWP hydraulic system is attached to the manual.
Warning! The hydraulic circuit is pressurized
(max. 1,1 bar at strainer waste).
The pressure setting of the maximum relief valves must
correspond to the following values:
A radiator can be provided as *optional for cooling the
hydraulic circuit oil.
As *optional, it is also possible to choose biodegradable
hydraulic oil. In case of its refilling or replacement, it must
strictly comply with the technical specifications of the
product already present in the system.
All the operations requiring the intervention on
the components of the machine, shall be
carried out by authorized and trained
technical staff.
Non-authorized staff shall not replace any of the
components. Many components have been
calibrated: a correct calibration of these parts
(possible only in C.M.C. or in authorized
Services) is necessary to ensure the safety of
the machine.
To Next Page
Loading...
Need help?
General
