CNCDIY CNC 6040 - Page 2

CNC 6040 Router / Engraver System
CNCDIY CNC Routing Machines System User’s Manual

2
Copyright
© 2010 CNCDIY CNC Routing Machine System. All Rights Reserved. 
Declaration
z Although, the routing machine system is produced by CNCDIY Routing Machine System, it
cannot be called a real commercial product. The user must require having relative knowledge
about mechatronics. All matters concerning the machinery, electronics, computer equipment,
are likely due to improper use or a virus, software compatibility reasons, result in failure, this
failure may cause a certain degree of risk and economic losses. CNCDIY Routing Machine
System does not bear the direct and indirect losses corresponding responsibilities.
z Any routing machine you purchased from CNCDIY Routing Machine System is only paid
for the price of the machine and relative device itself only, does not included any software
and software training costs. You can follow this "User’s Manual" learning how to operate or
through the network under the guidance from our staff. Each routing machine system is
operation normally after a standard test produce to identify the three-axis can be controlled
and able to run imported tool path properly. This recognition of our work is completed. All
the software training is not in our capacity. CNCDIY Routing Machine System is a vast
CNC-DIY enthusiast platform, we are very happy in our own knowledge, ability and time to
give novices within reach of as much as possible help, but please do not use these to help and
look at the FAQ to make is that we have obligations.
z Software copyright: This machine does not come with any software, operational use, and
covered in this guide are all related software from the Internet, the original author enjoys
copyright to the author's official Web site at your own download a trial version or purchase
licensed software, because not authorized the use of for all damage caused by the software
and legal issues from the users themselves.