12
ENGLISH
Fan Mode
1. Plug themains lead into awall socket.
2. Switch theair conditioneron.
3. Press [ MODE ] until the “Fan” indicator lightsup. Note: Thetemperature cannot be
set when thefan mode is activated. Setthedesired fan speed using theremote
control. Thedisplay shows thepresent room temperature.
Note: Formaximum efficiency:
• Make sure that no furniture or other objects are obstructing airflow.
• Close curtains/blinds during thewarmest hours of theday.
• Make sure that theair filters areclean.
• Keep windows and doors closed.
Timer function
Timer on
1. Plug themains lead into awall socket.
2. Point theremote control at theair conditioner and press [ TIMER ON ] repeatedly
to set thetime delay before theair conditioner switches on automatically (0.5–
24hours). Afew seconds after thedesired time has been set theair conditioner
will beep to indicate that thesetting has beenmade. “Timer On” will appear on
thedisplay of theremote control and agreen dot will shine in thebottom right-
hand corner of thedisplay on themainunit.
3. To cancel theset timer function, press [ ON/OFF ] on theremote control. Thegreen
dot in thebottom right-hand corner of themain unit will go out and “Timer On” will
disappear from thedisplay of theremote control.
Timer off
1. Plug themains lead into awall socket.
2. Switch theair conditioneron.
3. Point theremote control at theair conditioner and press [ TIMER OFF ] repeatedly
to set thetime delay before theair conditioner switches off automatically (0.5–
24hours). Afew seconds after thedesired time has been set theair conditioner
will beep to indicate that thesetting has beenmade. “Timer Off” will appear on
thedisplay of theremote control and agreen dot will shine in thebottom right-
hand corner of thedisplay on themainunit.
To Next Page
Loading...
Need help?
General
