CO/Tech MPPH-08CRN1-QB6G1 User Manual

14
ENGLISH
SLEEP – gradual lowering of thetemperature atnight
Note: Thesleep feature can only be activated with theair conditioner on and only if
the “Cool” mode is selected.
1. Press [ SLEEP ]. Theset temperature will be reduced by 1 °C during thefirst
30minutes.
2. After another 30 minutes thetemperature will be reduced by afurther 1 °C.
3. Thereafter theair conditioner will continue to reduce thetemperature for thenext
7hours and then return to theoriginal set temperature.
Air outlet
Theair flow from thefront air outlet can
to acertain degree be directed by moving
thelouvres byhand.
Care and maintenance
• Turn off and unplug theair conditioner from thewall socket before cleaning or
servicingit.
• Clean theair conditioner using alightly moistenedcloth. Useonly mild cleaning
agents, never solvents or corrosive chemicals. Neverspray theair conditioner
withwater.
• You can turn theair conditioner on again directly after it has been turned off but it
takes 3 minutes for thecompressor to restart and thecooling and dehumidifying
functions towork. Onlythefan will restart directly.
Cleaning thelter
Theair filter should be cleaned every 14days.
1. Turn off theair conditioner and pull
out theplug from thewall socket.
2. Remove thefilter holder over theair
inlet (5).
3. Vacuum thefilter and wipe it clean
with adampcloth. Cleantheair
intake where thefilter sitstoo.
4. Allow thefilter to completely dry
before refittingit.

CO/Tech MPPH-08CRN1-QB6G1 Specifications

General

Brand	CO/Tech
Model	MPPH-08CRN1-QB6G1
Category	Air Conditioner
Language	English