To Next Page

To Previous Page

ENGLISH

Error code E2 Theevaporation sensor is out of service. Turnoff theair con-

ditioner, pull out theplug and plug it inagain. Ifthis does not

solve theproblem and theerror code appears again, contact

aqualiﬁed service technician.

Error code E4 Incorrect or unreadable ﬁgures on thedisplay. Turnoff theair

conditioner, pull out theplug and plug it inagain. Ifthis does

not solve theproblem and theerror code appears again,

contact aqualiﬁed service technician.

Error code EC (only

applies to certain

models)

Coolant leakage sensor out of service. Contact aqualiﬁed

service technician.

Error code P1 Thelower water tank of theair conditioner isfull. Unscrew

thecover of lower drain hole (8) and ensure that all water

runsout. Ifthis does not solve theproblem and theerror

code appears again, contact aqualiﬁed service technician.

Note: Errorcodes are shown in order of priority E4-E2-E1-P1 when several error

codes are displayed atonce.

Responsible disposal

This symbol indicates that this product should not be disposed of with

general householdwaste. Thisapplies throughout theentire EU. Inorder

to prevent any harm to theenvironment or health hazards caused by

incorrect waste disposal, theproduct must be handed in for recycling

so that thematerial can be disposed of in aresponsible manner.

Whenrecycling your product, take it to your local collection facility or

contact theplace of purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

CO/Tech MPPH-08CRN1-QB6G1 User Manual

Questions and Answers: