EasyManuals Logo

CO/Tech MPPH-08CRN1-QB6G1 User Manual

CO/Tech MPPH-08CRN1-QB6G1
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
ENGLISH
Timer setting examples using theremote
Setting the air conditioner to start in 6 hours
1. Press [ TIMER ON ]. Theremote control will display “Timer On”, themost current
TIMER ON setting and the “h” (hour) symbol.
2. Press [ TIMER ON ] therequired number of times until “6.0h” is displayed on
theremote control. Thisinformation will then be sent to theair conditioner.
3. After afew seconds theremote control will revert back to showing thecurrent set
temperature.
4. Thestart function is now activated and theair conditioner is now programmed to
start in 6hours.
Setting the air conditioner to stop in 10 hours
1. Press [ TIMER OFF ]. Theremote control will display “Timer Off”, themost current
TIMER OFF setting and the “h” (hour) symbol.
2. Press [ TIMER OFF ] therequired number of times until “10h” is displayed on
theremote control. Thisinformation will then be sent to theair conditioner.
3. After afew seconds theremote control will revert back to showing thecurrent set
temperature.
4. Thestop function is now activated and theair conditioner is now programmed to
stop in 10hours.
Setting the air conditioner to stop in 2 hours and restart after 10 hours
1. Press [ TIMER OFF ].
2. Press [ TIMER OFF ] therequired number of times until “2.0h” is displayed on
theremote control.
3. Press [ TIMER ON ].
4. Press [ TIMER ON ] therequired number of times until “10h” is displayed on
theremote control.
5. Theair conditioner is now programmed to stop in 2 hours and restart in 10hours.
Setting the air conditioner to start in 2 hours and stop after 5 hours
1. Press [ TIMER ON ]. Theremote control will display “Timer On”, thelatest
TIMERON setting and the “h” (hour) symbol.
2. Press [ TIMER ON ] therequired number of times until “2.0h” is displayed on
theremote control.
3. Press [ TIMER OFF ].
4. Press [ TIMER OFF ] therequired number of times until “5.0h” is displayed on
theremote control.
5. Theair conditioner is now programmed to start in 2 hours and stop after 5hours.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CO/Tech MPPH-08CRN1-QB6G1 and is the answer not in the manual?

CO/Tech MPPH-08CRN1-QB6G1 Specifications

General IconGeneral
BrandCO/Tech
ModelMPPH-08CRN1-QB6G1
CategoryAir Conditioner
LanguageEnglish

Related product manuals