Settings
16 Chapter 2: Operation 98-135323-H
Password protection
A number of settings are password protected against unauthorized or accidental
use. They are marked with a padlock.
To unlock a page with password protected parameters do as follows:
1. Tap the first line on the page: Authorize admin changes.
2. Enter the administrator password.
3. Tap Done.
4. Tap Apply.
5. The padlocks are opened and you can change a parameter.
When leaving the page, the parameters are locked again.
The password protection mentioned here is related to the SAILOR
6282 AIS Transponder and not to the Control Panel. The AIS password
can be changed using the Service interface.
Figure 13: Password protection – example
To Next Page
Loading...
