Settings
98-135323-H Chapter 2: Operation 17
Voyage
Here you select or enter the various items for the ship’s current voyage. Swipe
upwards to display further items. Some of the parameters are only visible if
Inland Waterways has been enabled. These parameters may have been set up
during installation.
Tap the parameter you want to change and follow the instructions in the display.
Figure 14: Settings – Voyage
Item Description
Status Tap the field Status and set one option.
Destination Tap the field Destination and enter the destination
using the keyboard on the screen. Tap OK to accept.
ETA Tap the field ETA to enter the estimated time of
arrival.
Format: mm-dd hh:mm. Tap Done.
If ETA is not known, enter xx.
Cargo Tap the field Cargo and set one option.
Draught
a
Tap the field Draught and select the draught of ship
xx.x m
(0–20).(0–9). Tap Done.
To Next Page