Settings
98-175666-C Chapter 4: Setup of the antenna 4-27
IoT hub configuration
The IoT hub supports the monitoring solution from Cobham SATCOM where antenna
data are sent directly into the Cobham SATCOM IoT hub. This monitoring solution
requires a subscription.
Once the subscription has been purchased from Cobham SATCOM a list of IoT Keys will
be provided. Each IoT key is unique and will be bound to the antenna the first time it
connects. After a connection has been made, the IoT key cannot be used on other
antennas.
To enable IoT management on the page IoT & Management, do as follows:
1. Enter one of the provided IoT keys in the IoT key field.
2. Check the IoT hub client field.
3. For release 3.03 X.509 certificate and X.509 private key: you must manually upload
them to the antenna. Contact Cobham SATCOM to receive a valid certificate and
key.
4. Click Apply.
4.2.9 Dual antenna
For details how to set up Dual antenna operation see Appendix B, Dual antenna
solution.
4.2.10 User administration
In this section of the web interface you can configure the following administrative
settings:
• To change a password
• To set up permissions for guest user
Important
The IoT hub will not work without a subscription.
It is not possible to connect to the IoT hub or the data stream from
external systems.
Figure 4-19: Setup of the IoT hub
To Next Page
Loading...
Need help?
General