※ Setting up the remote controller ID
Example) When the remote controller ID is set to 1
Press the {ID} button, enter {0} and {1}, and press the {ID} button again.
To control all DVRs with the different ID, set the remote controller ID to 999.
３-５ Lite series Remote Controller
Turn the system power
ON or OFF.
B) System Operation and Setup Button
Data, Schedule, System Set up
Exit the current menu
or Move to the upper menu.
３-６ Mouse
The mouse pointer as shown below appears if a mouse is connected to the USB terminal at the front panel.
Mouse Control functions are shown below.
Click on the right
button
Monitoring Mode / Move from Play Mode to Monitoring
Menu / Pop up or remove Play Menu.
Show sub-folder of the certain Menu window.
Double click on the
left button
Click the left button
and drag
To Next Page
Loading...
