Cobra Deluxe series - 6-7-7 Factory Default; 6-7-8 Console; POS Port; 6-7-9 Alarm; 6-7-10 Alarm Duration

64
６-７-７ Factory Default
① Move to {Menu}  {Setup}  {System}  {7. Factory Setup}.
② Select {Yes} when Initialization (Yes/No) Window appears.
Note that all setting data will be initialized.
※ All values go back to Factory Default Value.
６-７-８Console / POS Port
① Move to {Menu}  {Setup}  {System}  {8 Console / POS Port}.
② On the selection window, select the device by using the arrow keys and the Select button.
６-７-９ Alarm
Alarm is to notify system incidents [Video Signal loss/ HDD full/ FAN fail/ HDD fail/ HDD warning] through
[Buzzer/ E-mail/ Relay01/ System check].
Select each [Off/Buzzer/E-mail/Relay01/Popup Window] by ticking.
※ Popup Window
Setup at {Menu}  {Setup}  {System}  {9. Alarm}.
Popup Window is to pop up the system check window in the
monitoring screen as shown. it indicates [Video Signal loss/ HDD
full/ HDD Not Detect / FAN fail/ Storage Fail/ Storage Warning /
Sensor Connection Tamper].
６-７-１０ Alarm Duration
① It sets the duration of the alarm triggered by the recording and system event.
② Move to {Menu}  {Setup}  {System}  {10. Alarm Duration}.
③ In the selection window, set Alarm Duration by using the arrow keys and the Select button.
６-７-１１ Menu Time Out
If no input is made in the System Setup menu from the front buttons, remote controller and mouse, the system
automatically shifts to the real-time monitoring mode.
① Move to {Menu}  {Setup}  {System}  {11. Menu time Out}.
② In the selection window, select the time zone you want to set by using the arrow keys and the
select button.
Off
The Automatic Menu Exit is not used.
※ The user can exit the menu by pressing the [ESC] button in the System
menu.
1/2/3 MIN
If there is no input from the front button, remote controller, or mouse, the
system will shift to the real-time monitoring mode.
User Setting
The user can enter the time directly.
※ The time can be set to 1 ~ 60 minutes.
③ Selecting the User Setting causes the input window to appear.
④ Enter the time by using the numeric buttons or the arrow keys and the Select button.
６-７-１２ Language
This feature is used to select the language for the On Screen Display (OSD) menu of the system. 18 languages
are supported.