Cobra Deluxe series - 6-7 System; 6-7-1 DVR Name; 6-7-2 ID for Remote Controller

61
② Relay SMTP is set on ‘Gmail’ as default, but when ‘Default’ (in menu tab) is selected, this will changed
to dvr@cctvuser.com.
③ Receiver Email can be set up to 5 users (emails).
④ Email Interval settings are as follows [5 sec / 1 min / 3 min / 5 min /10 min].
６-６-５ Bandwidth
Move to {Menu}  {Setup}  {Network}  {Bandwidth}.
This sets up the limit of the bandwidth to be used when bringing the live image, adjust resolution/quality and
transmitting the data by using the network.
Image Resolution
CIF / D1 / 960H
Image Quality
Adjust quality of the image, as the value increases, the
compression rate gets higher and image quality gets low.
However the transmission rate gets higher.
Bandwidth Limit
You can set the network bandwidth between 40 ~ 4000kbps.
As the value increases, the network transmission speed gets
faster.
Select Off if you do not wish to limit the network bandwidth.
Transmission
Codec
JPEG / H.264
６-７ System
[Figure 6-55. System Setup Window]
1. DVR Name
Used to name the DVR device.
2. ID For Remote Controller
Used to name the remote controller for running the system.
3. ID For Key Controller
Unique system controller number setting.
4. User Registration
Used to register, add, or delete users.
5. Admin. Password
Used to set the password of the Local System Administrator.
6. Upgrade
Upgrades the system firmware/system setup
7. Factory Setup
Initialize Setup.(Factory default value, except for the network
value)
8. POS
Set Ethernet POS or RS232
9. Alarm
Set the alarm On/Off and alarm format.
10. Alarm Duration
Set the alarm time by continuous/5/10/15/User setting
11. Menu Time Out
Used to set the time for exiting the System Setup menu
automatically and displaying the real-time monitoring screen.
12. Language
System OSD language setting
13. Video Loss Event Delay Time
It keeps ‘Video Loos’ during the setting period, then Video Loss
event comes out ( You can set Video Loss Event duration time
with 1/2/3/4/5 Sec)