Cobra Deluxe series - 6-4 Schedule; 6-4-1 Schedule Setup

55
６-４ Schedule
H-model series provide 4 different recording mode configurations. Each schedule mode can be set one week/24
hours and the recording follows the setting automatically.
[Figure 6-48. Schedule Window]
６-４-１ Schedule Setup
Select one schedule among Schedule1, Schedule2, Schedule3 and Schedule4.
(1) Selection Tip
① Select the day and time to be set by using the arrow keys.
② Select after moving the cursor onto Time(0-23) or Day(Sun. – Holiday) then the user can configure
the whole line at once.
③ Using the mouse can be easier.
(2) Holiday Registration
This feature is used to enable the user to set the holidays and schedule independently.
① Move to {Schedule}  {Holiday}.
※ If the date for the holiday and day of the week are the same in the {Schedule} menu,
the holiday setup will have priority over the date setup.
※ Designated holidays are marked with a red tag.
② On the Holiday Registration Window, select the date by using the arrow keys and the Select button
and press the Select button.
③ After setting the holiday, move to {Save} at the bottom of the menu. Afterward, press the Select b
utton.