Cobra Deluxe series - 6-3-3 Recording; 6-3-4 Alarm; 6-3-5 Duration; 6-3-6 Log

54
Search
６-３-３ Recording
(1) Recording Resolution
Used to set the resolution of the recorded channel.
Type
Resolution
Input Camera Type
1080P
720P
960H
NTSC
PAL
CIF
-
-
352 x 240
352 x 288
D1
-
-
704 x 480
704 x 576
960H
-
-
944 x 480
944 x 576
720P
1280 x 720
1280 x 720
-
-
1080P
1920 x 1080
-
-
-
(2) Recording Quality
Used to set the quality of the recorded video. Select among five levels {Lowest} / {Low} / {Middle} / {High} /
{Highest}.
※ The higher picture quality, the bigger file size.
(3) Frame Rate
If the user configures Normal Speed and Event Speed at the same time, the continuous recording follows Normal
Speed frame rate and the event recording follows Event Speed frame rate.
Normal Speed
Set the recording frame rate for Continuous recording.
Event Speed
Set the recording frame rate for Motion, Sensor, Audio, Text
Maximum Recording Frame by Resolution
Resolution
Model
1080P
720P
CIF
(NTSC/PAL)
D1
(NTSC/PAL)
960H
(NTSC/PAL)
16CH
480
480
480/400fps
480/400fps
960
/800fps
8CH
240
240
240/200fps
240/200fps
480/400fps
4CH
120
120
120/100fps
120/100fps
240/200fps
(4) Audio
Used to set the recording of the external audio input linked to the system.
６-３-４ Alarm
※ This function is used to generate alarms through the Buzzer / PTZ Preset / e-mail / Relay / Spot / Popup in
case of an event. PTZ preset can be configured between 1-16.
※ Popup function is to inform event occurrence to the user through a warning window in the
real-time monitoring mode.
６-３-５ Duration
Setup Pre-Recording( On / OFF ), Post-Recording(5 / 10 / 15 / 20 / 60 / 150 / 300 seconds).
※in Pre-Recording, images of the last 7 seconds before the event occurrence are recorded.
６-３-６ Log
Setup On / Off for Motion / Sensor / Sound / Text Input.