① The way of the date search is same as the Multi-Channel Search.
② The hourly recording status of the selected date is viewed after selecting a desired date.
③ Select the start time and channel by using the arrow keys.
④ The hourly displayed video of the selected channel will then be displayed in the minute bar graph.
⑤ Move the time line by using the arrow keys and the numeric buttons and specify the time. Afterwar
d, press the Start button and play back the contents.
５-７-７ Multi-Day Search
The user can playback the video contents of the certain channel recorded in different dates simultaneously.
Entering into the search mode during the Multi-Day playback leads to the Multi-Time Search.
① The way of the date search is same as the Multi-Channel Search.
② The date list and the hourly recording status starting from the selected date are viewed by selectin
g the desired date.
③ Select the start time and channel by using the arrow keys.
④ The recorded video of the selected channel will then be displayed as the minute bar graph.
⑤ Move the time line by using the arrow keys and the numeric buttons and specify the time. Afterwar
d, press the Start button and play back the contents.
５-７-８List All
To check Time index in order of time line.
[Figure 5-28. Time Index]
５-８ POS Search
５-８-１POS Search Mode
On the real-time monitoring screen, select {Menu} {Search} {POS Search} and then a searching
window pops up as shown below.
５-８-２Year/Month/Day/Text/Time Selection
Please select date/time, Time index, Text 1~3, and select the start time within the channel..
To Next Page
Loading...
