Connections
DC Adapter
When using the PMP in a vehicle, you can use the supplied DC adapter to power the
PMP.
1. Connect the DC adapter to the ”DC 9.5V IN” jack on the left side of the PMP.
2. Plug the other end into the vehicle DC outlet (cigarette lighter socket) as shown
below.
Note:
Ø Do not operate the unit or view videos while driving a vehicle.
Ø Disconnect the PMP from the DC adapter when starting the vehicle.
Ø Detach the battery pack when using the DC adapter.
Ø Do not use the DC adapter to charge the battery.
To Next Page
Loading...
