To Next PageTo Next Page
Need help?Do you have a question about the Cockshut 30 and is the answer not in the manual?
Consult your dealer for information not in this manual for proper service and maintenance.
Essential safety rules for tractor operation, covering starting, driving, and general handling.
Crucial pre-operation steps: lubrication, oil levels, tire inflation, and cooling system checks.
Advises operating the tractor at half capacity and using only lower gears for the first 40 hours.
Explains the engine oiling system, detailing how oil is supplied and circulated.
Provides instructions for checking and adjusting valve tappet clearance, specifying the required gap and frequency.
Details how to adjust the high-speed jet for optimal fuel mixture based on conditions and fuel type.
Detailed steps for safely draining, removing, cleaning, and replacing the oil filter element.
Emphasizes using only quality oil filter elements to ensure proper performance and prevent damage.
Instructions for servicing the oil cup of the air cleaner, including cleaning and refilling frequency.
Explains the engine cooling system, including the roles of the radiator, pump, fan, and thermostat.
Lists checks to perform if overheating occurs, including water level, fan belt, and ignition timing.
Provides a general description and analogy for the tractor's electrical system, comparing it to a city's water works.
Covers weekly battery checks, specific gravity, and proper storage procedures for cold weather.
Explains the distributor's function in timing and distributing ignition spark to cylinders.
Provides guidance on inspecting, adjusting, and replacing breaker points for proper ignition timing.
Step-by-step guide for adjusting front wheel bearings to eliminate play and ensure proper fit.
Details the correct air pressure for front and rear tires, including specific recommendations for plowing.
Describes the transmission construction, including gear types, speeds, and the optional creeper gear.
Provides instructions for adjusting the brake pedals to ensure proper free movement and even tension.
Critical instruction not to change gears while the tractor is moving, emphasizing stopping first.
Explains how to adjust the hitch for proper alignment with the implement to ensure efficient operation.
General