17
After Sales Support
Telephone: 1300 663 907
Internet: www.winplus.com.au
Mounting Location
When choosing a location to mount the PIR motion sensors, the below should be taken into
consideration:
• Mount the PIR motion sensor in a location which an intruder is likely to walk past.
• Mount the PIR motion sensor in the corner of a room to maximize the sensor coverage,
ideally at a height of 2m.
• Ensure your PIR motion sensor has clear sight of the area you want to protect. Infrared
signals can be blocked by solid objects (including glass and metals).
• Always test the sensor detection before mounting the sensor to ensure the coverage is
sucient for your needs.
• Avoid mounting the detector close to windows, air conditioners, heaters, refrigerators,
ovens or in direct sunlight. These places can have rapid temperature changes and may
mistakenly trip the sensor.
• If two detectors are installed in the same detection area, adjust their location to avoid
interference and false alarms.
SIDE
VIEW
TOP
VIEW
2m
GROUND
To Next Page
Loading...
