18
After Sales Support
Telephone: 1300 663 907
Internet: www.winplus.com.au
Mounting & Installation Instructions:
The Cocoon Wireless Alarm Kit includes mounting accessories for your PIR sensors.
1. Choose a location for your PIR sensor. An ideal location is one that an intruder is
likely to walk past.
2. Determine installation height for the bracket to change the detection distance
and angle. Refer to the below diagrams for assistance. It is recommended to mount
the sensor at a height of about 2m from the ground.
3. Fix the bracket to the wall using the included screws, then secure the PIR motion
sensor to the bracket.
4. After installation, walk close to the sensor and watch the for the LED indicator to
ash. If the sensor ashes, then the sensor is working correctly.
5. Adjust your PIR motion sensor to achieve the best detection coverage.
Tip: Use the below diagram to maximize your sensor range and scope.
To Next Page
Loading...
