Codan NGT AR User Manual

Compliance
98 NGT Transceiver Getting Started Guide
EMC
To ensure compliance with the EMC Directive is maintained,
you must:
1 Use standard shielded cables supplied from Codan
(where applicable).
1 Ensure the covers for the equipment are fitted correctly.
1 Cover unused connectors on the junction box (if fitted)
and RF unit with the protective caps supplied to prevent
electrostatic discharge passing through your NGT
equipment.
Electrical safety
To ensure compliance with the European Low Voltage
Directive is maintained, you must install and use the NGT
Transceiver in accordance with the instructions in the NGT
Transceiver Getting Started Guide and the NGT Transceiver
Reference Manual.
When using equipment that is connected directly to the AC
mains these precautions must be followed and checked before
applying AC power to the unit:
1 Use the standard AC mains cable supplied.
1 Ensure the covers for the equipment are fitted correctly.
CAUTION
If it is necessary to remove the covers at
any stage, they must be refitted correctly
before using the equipment.
CAUTION
If it is necessary for a qualified electronics
technician to remove the covers during
servicing, they must be refitted correctly
before using the equipment.

Codan NGT AR Specifications

General

Brand	Codan
Model	NGT AR
Category	Transceiver
Language	English