Entering and editing text
NGT Transceiver Getting Started Guide 63
1 To enter a letter on another key, press the key for the
letter.
You do not need to wait until the cursor moves to the
next space.
Changing between alpha and numeric
characters
To change between upper-case and lower-case letters and
numbers in an editable screen:
1 Press # to change the character/case indicator at the
bottom right of the screen from A (upper-case) to a
(lower-case) to # (numbers).
Moving the cursor
To move the cursor across the text:
1 Use or to move the cursor left or right respectively.
NOTE
When you are prompted to enter a call
address, the characters that you can enter
are determined by the call systems installed
in the transceiver.
To Next Page
Loading...
