CES-128 voice encryptor option
20 NGT Transceiver Getting Started Guide
Using the CES-128 voice encryptor
To use the CES-128 voice encryptor:
1 Start a call (see page 14, Making a selective call).
1 Press SEC.
The transceiver responds with two high short beeps, and
displays Go Secure with the secure mode and
Corporate secure index used. For example:
If you are in the Channel List, the active CES-128 voice
encryptor is indicated by the text Secure <index>
highlighted at the bottom left of the channel screen. For
example:
To Next Page
Loading...
