CES-128 voice encryptor option
30 NGT Transceiver Getting Started Guide
Using the CES-128 voice encryptor in
standby mode
If you are operating in a communication network that has
transceivers that use secure communications, non-secure
communications, or both, then use the secure standby mode.
When the CES-128 voice encryptor is in standby mode, you
can hear all communications on the selected channel that are
made by other transceivers in clear mode. If your transceiver
detects an encrypted transmission from another station that is
in secure mode, your transceiver will exit secure standby
mode and go secure so that you can hear the secure, decrypted
communication.
To enter standby mode:
1 Press SEC to switch on the CES-128 voice encryptor.
1 Press
*
.
The CES-128 voice encryptor switches to standby mode.
If you are in the Channel List, the standby voice
encryptor is indicated by the text Secure
<index>[P]
underlined at the bottom left of the channel screen. For
example:
NOTE
The transceiver automatically switches
from standby mode to secure mode if an
encrypted transmission is received.
To Next Page
Loading...
Need help?
General
