Getting started
18 NGT Transceiver Getting Started Guide
Pausing scanning
To pause scanning:
1 Do one of the following:
• To pause scanning on the current channel/mode,
press .
• To pause scanning and scroll to another channel/mode,
press or .
The channel/modes through which you can scroll are
those in the networks that were being scanned. They are
not listed alphabetically but in the order in which they
were being scanned.
If you do not press a key within 30 seconds, the
transceiver automatically resumes scanning.
1 While scanning is paused, do one or more of the
following:
• To speak on air, hold down PTT.
• To resume scanning immediately, press .
To Next Page
Loading...
Need help?
General
