Code 2600 User Manual

C007964_01_CR2600_User_Manual
6
9.0 - Sux Enter
A Sux Enter character is disabled by default. To enable Sux Enter, please scan the following conguraon code:
2. Plug the USB connector into the USB port on the computer, or RS232 (Serial) cable to a serial port on the computer. Once
plugged in, the modem’s blue LED light will ash (reference modem image on page 4, secon 6). Follow steps 1 and 2 of page 4,
secon 6 to establish the Bluetooth connecon.
For more conguraon opons, download the CR2600 Conguraon Guide from www.codecorp.com
USB Cable RS232 Cable
8.0 - Aaching the CodeXML® M3 Modem
1. Aach the 8-pin DIN end of the cable to the CodeXML® M3 Modem.
Included with the CodeXML® M3 Modem is a USB or RS232 cable:
USB Cable
RS232 Cable

Code 2600 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Voltage	5 VDC ± 10%
Resolution	4 mil
Interface	USB, RS232, Keyboard Wedge
Supported Barcodes	Code 39, Code 128, UPC/EAN, Interleaved 2 of 5, Codabar, MSI
Humidity	5% to 95% (non-condensing)