C007964_01_CR2600_User_Manual
15.0 - Reader ID and Firmware Version
9
Reader ID and Firmware
iVVVVWWWWXXXXSSSSSSSSSSAOODYYYYHHIIIIJJJJKKKKLLLL<TAB>Z…Z
To nd out the Reader ID and rmware version, open a text editor program (i.e., Notepad, Microso Word, etc.) and read the
following code:
You will see a text string indicang your rmware version and CR2600 ID number (see below):
i indicates ‘I’ string output;
VVVV is the applicaon rmware version number;
WWWW is the core applicaon rmware version number;
XXXX is reserved for the radio rmware version number;
SSSSSSSSSS is the Reader’s serial number (ten digits);
A is the current execuon state:
OO is the OEM idener;
D is the display type:
YYYY is the ash le system version number. Reserved;
HH is the hardware revision;
IIII is the hardware type idener: 0009 indicates a CR2600
JJJJ is the boot applicaon version;
KKKK is the operang system kernel version;
LLLL is the root le-system version;
<TAB> is the ASCII TAB character;
Z…Z is the OEM decoder version: a null terminated string of printable ASCII characters. Without a decoder.ini le, the order
of the decoders listed here indicates the order of use.
Example:
Xap/i3000300006040010002363A06D-SD+SQ
Note: Code will periodically release new rmware for CR2600 readers. For informaon on latest rmware versions, call Code
at (801) 495-2200. To upgrade rmware, please visit our website at hp://www.codecorp.com/codesupport.php and follow
instrucons provided.
“A” means core is running
“B” means undened
“C” means undened
“0” or “N” is no display device
“D” is the standard Keypad/Display
To Next Page
Loading...
Need help?
General
