Code 2600 User Manual

C007964_01_CR2600_User_Manual
Fuel Gauge Buon
4.0 - Fuel Gauge Baery Status Indicators
Check the Baery Life
Press the fuel gauge buon to determine remaining baery life. If the baery has less then 10% capacity, the rst LED will ash
rapidly. For 25% or greater capacity, the LEDs will ash ON for 4 seconds.
3
Fuel Gauge Status Indicator While Charging
If the baery has less then 10% capacity, the rst LED will ash rapidly while charging. For 25% or greater capacity, the LEDs will ash
ON for 4 seconds.
Fuel Gauge Indicators
Baery Life
<10% Rapid Flashing
<25% ON
25-50% ON ON
50-75% ON ON ON
75%+ ON ON ON ON
5.0 - Powering On/O the Reader
Press and hold either the buons or trigger, for one second, to power on reader. The CR2600 will beep, vibrate and the LEDs will ash
to indicate it is on and ready for use.

Code 2600 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Voltage	5 VDC ± 10%
Resolution	4 mil
Interface	USB, RS232, Keyboard Wedge
Supported Barcodes	Code 39, Code 128, UPC/EAN, Interleaved 2 of 5, Codabar, MSI
Humidity	5% to 95% (non-condensing)