C007964_01_CR2600_User_Manual
11
The CR2600 needs only minimum maintenance to operate. The ps below for maintenance suggesons.
Cleaning the CR2600
The CR2600 window should be clean to allow the best performance of the device. The window is the clear plasc piece inside the
head of the reader. Avoid touching the window. Your CR2600 uses CMOS technology that is much like a digital camera. A dirty
window may stop the CR2600 from reading bar codes.
If the window becomes dirty, clean it with a so, non-abrasive cloth or a facial ssue (no loons or addives) that has been
moistened with water. A mild detergent may be used to clean the window, but the window should be wiped with a water moistened
cloth or ssue aer using the detergent.
The following agents are approved to clean a Code bar code reader:
1) Alcohol Wipes
2) Clorox® Non-Bleach Disenfecng Wipes
3) Clorox Bleach Soluon (10% Clorox bleach, 90% tap water)
4) Medical DiAirKem
5) Sani-Cloth® HB, Super Sani-Cloth® Germicidal, Sani-Cloth® Plus Germicidal Disposable Wipes
6) Virex® II Disinfectant Cleaner
17.0 - CR2600 Maintentance
Technical Support and Returns
To modify any default sengs, download the CR2600 Conguraon guide at www.codecorp.com/les.php and scan the appropriate
code. For user specic conguraons, contact Applicaon Engineering at Code appeng@codecorp.com.
For all returns Code will issue an RMA number which must be placed on the packing slip when the reader is returned.
Visit hp://www.codecorp.com/codesupport.php for more informaon.
To Next Page
Loading...
Need help?
General
