C001537_15_CR2_User_Manual 24
Save Settings
1. Insert the Code Router Bluetooth Edition for Windows CD into your PC’s CD drive. The CD will automatically begin
the installation process. When you get to the screen pictured below, please enter the CD Serial # Key found on the
card included in the CD case.
2. When you get to the screen pictured below, please choose from the appropriate settings. For a description of
each setting, please see Chapter 3. If connecting via Bluetooth radio, you will need to know the Virtual COM
port number your Bluetooth software has assigned (see Frequently Asked Questions). If you wish to enable
the AutoDownload feature please check the appropriate box in the next screen. Finish the installation process and
restart your computer.
3. After restarting your computer, you will see a blue “arrows” icon in the system tray of your computer. CodeXML
Router was successfully installed.
1.7.10 - Installing CodeXML Router Bluetooth Edition for Windows
To Next Page
Loading...
Need help?
General
