Code Reader 1200 User Manaul

C001537_15_CR2_User_Manual 25
Save Settings
1.8 - CR2 Feedback Guide
The CR2 features two (2) LED’s on the front of the unit. These LED’s give feedback based on various funcitons of the
CR2 unit. Each LED has a small icon just underneath it that represents the following:
Battery or Power Icon
Memory / Connection Icon
The CR2 unit will automatically fl ash battery or power status every 15 seconds. Each LED can show three
(3) colors; Green, Amber, or Red. The colors will vary depending on the message the unit is sending.
• Green = 50% - 100% capacity of battery
• Amber = 20% - 50% capacity of battery or 10% - 99% of memory available
• Red = 0% - 20% capacity of battery or no memory available
The CR2 also emits beeps or vibrates for user feedback. Please follow the table below to better understand
your unit’s feedback.
CR2
Successfully
Powers Up
Attempting to
Decode
1 Beep
Battery
Status
None
None
CR2
Successfully
Enumerates
with Host via
USB Cable
Solid
Green
None
1 Beep
Flash
Green
Flash
Green
Sound
Battery
LED
Normal Operation Feedback
Memory/Connection
LED

Code Reader 1200 Specifications

General

Brand	Code
Model	Reader 1200
Category	Barcode Reader
Language	English