C001537_15_CR2_User_Manual 43
Save Settings
For an explanation of Pharmacode settings and all programming codes please refer to Appendix G of the CR2 User
Manual. You may download the Appendix G at:
http://www.codecorp.com/manuals.html
3.19 - Pharmacode
All postal code default settings are OFF. Scan the following codes to enable the appropriate Postal symbology:
Note: If you wish to change which Postal code is activated, you MUST fi rst scan the disable all postal codes symbol and
then scan your desired symbology.
Australian Post On Japan Post On KIX
Planet On Postnet On Postnet and Planet On
Disable All
Royal Mail On Postal Codes (Default) Sample Postnet Code
3.20 - Postal Symbologies
3.18 - PDF 417 Symbology
Scan the following codes to enable/disable PDF 417 symbology settings:
PDF 417 On (Default) PDF417 Off Macro PDF 417 On
Macro PDF 417 Off (Default) Sample PDF 417 Code
4-State CB On (Intelligent Mail)
To Next Page
Loading...
Need help?
General
