Code Reader 1200 User Manaul

C001537_15_CR2_User_Manual 49
Save Settings
4.5 - Reader ID and Firmware Version
4.6 - Reader Settings Lock
To lock or unlock the current settings on your reader please scan the codes below:
Reader Settings Locked Reader Settings Unlocked
NOTE: Prefi x and Suffi x programming codes, memory transfer and delete commands, “Clear All CodeXML Rules” and
“Suffi x -Erase/None”commands are not locked by this feature.
To fi nd out the Reader ID and fi rmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read
the following code:
Reader ID and Firmware
You will see a text string indicating your fi rmware version and CR2 ID number (see below):
Xap/i - Code Internal ID (not applicable)
VVVV is the application fi rmware version number
WWWW is the bootloader fi rmware version number
XXXX is the radio fi rmware version number
SSSSSSSSSS Reader’s serial number (ten digits)
P is “A” if running fi rmware is the application, “B” if BootLoader
XXX-XX+XX - Internal ID (not applicable)
Example:
Xap/i3000300006040010002363A06D-SD+SQ
Note: Code will periodically release new fi rmware for CR2 readers. For information on latest fi rmware versions, call Code
at (801) 495-2200. To upgrade fi rmware, please visit our website at http://www.codecorp.com/codesupport/html and
follow instructions provided.
Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX

Code Reader 1200 Specifications

General

Brand	Code
Model	Reader 1200
Category	Barcode Reader
Language	English