C001537_15_CR2_User_Manual 38
Save Settings
3.1 - Aztec Symbology
Scan the following codes to enable/disable Aztec symbology settings:
Aztec On Aztec Off (Default) Sample Aztec Code
3.2 - Codabar Symbology
Scan the following codes to enable/disable Codabar symbology settings:
Codabar On (Default) Codabar Off Sample Codabar
3.3 - Codablock F Symbology
Scan the following codes to enable/disable Codablock F symbology settings:
Codablock F On Codablock F Off (Default) Sample Codablock F Code
Note: When Codablock F and Code 128 decoding are enabled, there is some danger of mistakenly decoding a damaged
Codablock F symbol as a Code 128 symbol. Therefore, Code 128 decoding should be disabled when Codablock F
decoding is enabled.
Scan the following codes to enable/disable Code 11 symbology settings:
Code 11 On (Default) Code 11 Off Code 11 Checksum 1 digit
Code 11 Checksum 2 Digit Code 11 Checksum 1 Digit
& Stripped from Result & Stripped from Result Code 11 Sample
3.4 - Code 11 Symbology
To Next Page
Loading...
Need help?
General
