Purpose and Scope
Refer to this User’s Manual for procedures on how to perform Safe Label System (SLS)
user operations, including:
Setting up the hardware and software
Performing basic functions such as logging in and out, and configuring some
System settings (for example, sound volume, brightness)
Printing and confirming syringe labels
Checking drug syringes by scanning their barcodes
Maintaining the system
Monitoring system status and troubleshooting common problems
Product Information
For technical assistance with SLS Point of Care Station, call Codonics Technical
Support at the following number:
Phone: +1 440.243.1198
Toll Free: 800.444.1198 (USA only)
Technical Support is available 24/7/365. Technical Support is also available online via
email and the Codonics web site:
Email: support@codonics.com
Web Sites: www.codonics.com
General product information can also be requested by sending email to:
Email: info@codonics.com
Please include your postal mailing address and telephone number in the email message.
Basic product information is returned via email unless otherwise requested.
Warnings and Limitations of Use
Location of Safety and Compliance Labels
Codonics is in compliance with various regulations.
The SLS PCS safety and compliance label, shown below, is located on the bottom of the device
(shown on the following page).
To Next Page
Loading...