7 OPERATORS MANUAL VITRO LINE
Water Supply
15mm dia. water mains supply, terminating at a convenient stop tap located within 1m of the beverage
machine.
Water Pressure
Minimum: 100 KPa
Maximum: 800 KPa
A 15mm double back check valve, with inspection port, should be fitted prior to the flexible hose.
A Water Blocker must be fitted to the Main water supply
Do not power up before connecting water
Operating
The dispense area on the right marked with the water droplet symbol is used for Hot Water vends.
All other drinks use the central dispense area marked with a cup symbol.
To Next Page
Loading...
