Colby Instruments XT-100 - Relay Commands for Models XT-100-001 N Thru XT-100-100 N

66 Relay commands for Models XT-100-001N thru XT-100-100N
Relay Commands for Models XT-100-001N
thru XT-100-100N
REL arg1 [ on | off ] Relay command set
REL? Relay query
RELC arg1 Relay exercise cycles
REL arg1 on | off Relay (COMMAND)
Description
Turns on or off the specied relay number arg1.
The value 0 selects ALL relays.
Example
rel 1 on turn on relay # 1
rel 1 off turn off all relays
REL? Relay (QUERY)
Description Returns the current state of relays numbered left (#16) to right (#1)
Example rel?
Returns 0000000000000101
RELC arg1 Exercise Relay Cycles (COMMAND)
Description
Exercise the relays by cycling the relays (OFF-ON-OFF) for the arg1 specied # of cycles in the range
(1 to 100).
Example relc 50
Returns None. Check error code.
28
COLBY INSTRUMENTS XT-100 VERSION 1.0 OPERATING AND PROGRAMMING MANUAL