Coldelite LB-100B - Trouble Shooting Guide; Machine Will Not Start

TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE
CAUSE
SUGGESTED REMEDY
1) Machine will not start a) No power to the machine
a) Check circuit breaker,
selector switch position,
and power supply wiring
b) Off on overload b) Wait 5 minutes and
push reset button
c) Malfuncti oning selector c) Contact service agency
switch
d) Dispense head dl Check if dispense head
safety switch not
is properly closed and
energized if pin
is activating
the safety switch
located behind the
front panel
e) Beater motor el Check if 24 volt
and compressor transformer is oper-
contactor not ating properly
energized
2) Product too soft
a) H.O.i\/t. control out of
calibration or malfunctioning
b)
machine low on refrigerant
c) Insufficient freezing time
a) Contact authorized
service agency
bl Contact authorized
service agency
C) Increase freezing time
3) Product too hard
a) Freezing time too long
a) Check for proper
freeze time and the
H.O.M. setting
- - - -
4) Machine will not freeze a) Restricted air flow
b) Compressor not working
C) System refrigerant
low
d) Malfunctioning
H.O.M.
e) Malfunctioning
cont actor
f) Insufficient power supply
a) Remove obstruction
or restriction
b) Contact authorized
service agency
c) Contact authorized
service agency
dl Contact authorized
service agency
e) Contact authorized
service agency
f) Contact authorized
service agency
PACE 18