18
DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
1. CLEANING OF THE RECOVERY TANK
1. Empty the recovery tank completely
2. Empty the solution tank completely and lift it up to its vertical position blocking it through the suitable
prop
3. Unscrew the wing nuts of the recovery tank cover, rotate it of 90° and take it off
4. Take off the rear plug of the recovery tank (1)
5. Take off the exhaust hose from its seat and unscrew the plug (2)
6. Clean the inside of the recovery tank with a water jet
7. Reassemble everything repeating inversely above-mentioned operations
2. CLEANING OF THE RECOVERY TANK FILTER
1. Empty the solution tank completely and lift it up to its vertical position blocking it through the suitable
prop
2. Unscrew the filter cover rotating it counterclockwise
ATTENTION! Do not let in water into the hose connected to the filter cover
3. Extract the filter body from its housing and rinse it thoroughly
4. Reassemble everything repeating inversely above-mentioned operations
To Next Page
Loading...
