IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
HOW TO FIND OUT THE MESSAGE NUMBER
Alarm output: UnivState 2
The output is closed while the alarm generated by the Universal analog protection,
where the Message #2 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 3
The output is closed while the alarm generated by the Universal analog protection,
where the Message #3 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 4
The output is closed while the alarm generated by the Universal analog protection,
where the Message #4 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 5
To Next Page
Loading...
