IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
The output is closed while the alarm generated by the Universal analog protection,
where the Message #5 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 6
The output is closed while the alarm generated by the Universal analog protection,
where the Message #6 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 7
The output is closed while the alarm generated by the Universal analog protection,
where the Message #7 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 8
The output is closed while the alarm generated by the Universal analog protection,
where the Message #8 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 9
The output is closed while the alarm generated by the Universal analog protection,
where the Message #9 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 10
The output is closed while the alarm generated by the Universal analog protection,
where the Message #10 is used, is present in the alarm list. See the UnivState 1
for picture how to find the message number.
Alarm output: UnivState 11
The output is closed while the alarm generated by the Universal analog protection,
where the Message #11 is used, is present in the alarm list. See the UnivState 1
To Next Page
Loading...
