To Next PageTo Next Page
Need help?Do you have a question about the ComAp IL-NT MRS15 and is the answer not in the manual?
General| Operating temperature | -20 to +70 °C |
|---|---|
| Protection | IP20 |
| Mounting | DIN rail |
| Supply voltage | 8-36 VDC |
| Communication | CAN, Modbus |
Defines the scope, purpose, and conventions of the reference guide.
Essential safety precautions for controller installation and operation.
Guidelines to ensure safe remote operation of the gen-set controller.
Information on compatible software and hardware versions.
Overview of the InteliLite NT controller's capabilities and design.
Details the standard items included with the controller.
Installation and use of the RS232 communication module.
Details on the dual-port RS232 and RS485 communication card.
Information on the USB service communication module.
Module for driving analog gauges using PWM outputs.
Software for remote signalling and control of the controller.
Enables Ethernet/Internet communication for the controller.
Guide to programming the controller via software.
Description of USER and ENGINEER interface modes.
Diagram of terminal connections for InteliLite NT controllers.
Wiring schematics for AMF and MRS applications.
Wiring configurations for stand-by gen-set applications.
Essential steps for controller installation and setup.
How to configure analog inputs for sensors.
Configuration and behaviour of binary inputs.
Description of binary output operations and their uses.
Managing controller setpoints, passwords, and basic settings.
Integrating the controller with electronic engine control units (ECU).
Details available alarms, causes, and system responses.
Explains the different operational states of the generator set.
Summary table of I/O capabilities for controller models.
List of protective functions available for the generator.
Specifications for power supply and voltage inputs.
Environmental limits, dimensions, and weight of the controller.
Technical data for optional communication and extension modules.
