InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
accessible at a public and static IP address if you want to
connect to it from the Internet.
This mode uses the "AirGate" service, which hides all the
issues with static/public address into a black box and you
do not need to take care about it. You just need only a
connection to the Internet. The AirGate server address is
adjusted by the setpoint AirGate addr.
12.2.3.24 Setpoint: AirGate IP
This setpoint is used for entering the domain name or IP address of the
AirGate server. Use the free AirGate server provided by ComAp at address
airgate.comap.cz if your company does not operate it's own AirGate server.
12.2.3.25 Setpoint: SMTP authent
Switch this setpoint to ENABLED position if your SMTP server requires
authentificated access. You have also adjust SMTP user name and SMTP
password. Ask your internet provider or IT manager for this information.
NOTE:
Most of public free SMTP servers require authentification. You will get
instructions when you register to the freemail service.
12.2.3.26 Setpoint: SMTP user name
Use this setpoint to enter the user name for the SMTP server if SMTP
authentification is enabled.
To Next Page
Loading...
