ComAp IM-NT-BB - Page 194

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
194
See the chapter Timers for more details about timers.
12.2.13.8 Setpoint: Timer channel 8
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #8. Output from this
channel is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.9 Setpoint: Timer channel 9
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #9. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.10 Setpoint: Timer channel 10
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #10. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.