ComAp IM-NT-BB - Page 195

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
195
12.2.13.11 Setpoint: Timer channel 11
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #11. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.12 Setpoint: Timer channel 12
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #12. Output from this
channel is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.13 Setpoint: Timer channel 13
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #13. Output from this
channel is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
12.2.13.14 Setpoint: Timer channel 14
Group
Timer settings