ComAp IM-NT-BB - Page 263

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
263
Description
This input is used to disable temporarily the output from the Timer channel
#3.
NOTE:
See also the setpoint TimerChannel 3 and output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.34 Binary input: Timer block 4
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel
#4.
NOTE:
See also the setpoint TimerChannel 4 and output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.35 Binary input: Timer block 5
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel
#5.
NOTE:
See also the setpoint TimerChannel 5 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
14.2.1.36 Binary input: Timer block 6
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel
#6.
NOTE: