ComAp InteliPro - Low Voltage Measurement Wiring; Intelipro, SW Version 1.4, ©Comap - April 2014

InteliPro, SW version 1.4, ©ComAp – April 2014
InteliPro 1.4 Comprehensive Guide - rev. 1
1-6
Adjust nominal voltage, nominal current, CT ratio and PT ratio by appropriate setpoints in the Basic
Settings group. Learn about how to view and change setpoints in the User interface chapter.
LOW VOLTAGE MEASUREMENT WIRING
MAINS
VOLTAGE
L3L2L1N
L1
L2
L3
N
G
<Comm Trp> /
<Trip 1> /
<Trip 2>
MAINS
VOLTAGE
L3L2L1N
L1
L2
L3
G
<Comm Trp> /
<Trip 1> /
<Trip 2>