InteliSys
NT
-AFR-Abstract, SW version 1.0, ©ComAp – December 2006 4
IS-NT-AFR-1.0-Abstract.pdf
Available documentation
Inteli NT general manuals
IGS-NT-2.0-Application guide.pdf
Dedicated to gen-set control panel builders and project designers.
Covers above all following items:
• IG/IS-NT hardware options
• Comparison of number of I/O and communication ports in different HW modifications
• Order codes overview
• Applications overview – purpose, connection recommendations, function description
• PLC functions description
• Virtual peripherals – principle and usage
IGS-NT-2.0-Installation guide.pdf
Dedicated to gen-set control panel builders and everybody concerned with installation of the gen-set.
Includes information about following topics:
• Terminals and dimensions of all controllers and peripheral modules
• Recommended wirings
• Controllers’ interface options
• Default sensors
• Speed governor interfaces
• AVR interfaces
• Technical data
IGS-NT-2.0-Operator guide.pdf
Dedicated to everybody concerned with operation and maintenance of the gen-set.
It describes
• Operator interface
• Measurement screens of the NT family controllers
• Modes and function of the controller.
• IG/IS-NT Available documentation list
IGS-NT-2.0-Troubleshooting guide.pdf
Includes description of possible troubles during configuration, adjustment and operation of the
controller.
Consists of two parts:
• List of troubles and their solution
• How to … section with recommended procedures in some typical situations
To Next Page