IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
This mode uses the "AirGate" service, which hides all the
issues with static/public address into a black box and you do
not need to take care about it. You just need only a connection
to the Internet. The AirGate server address is adjusted by the
setpoint AirGate addr.
Setpoint: AirGate IP
This setpoint is used for entering the domain name or IP address of the AirGate
server. Use the free AirGate server provided by ComAp at address
airgate.comap.cz if your company does not operate it's own AirGate server.
Setpoint: SMTP authent
Switch this setpoint to ENABLED position if your SMTP server requires
authentificated access. You have also adjust SMTP user name and SMTP
password. Ask your internet provider or IT manager for this information.
NOTE:
Most of public free SMTP servers require authentification. You will get instructions
when you register to the freemail service.
Setpoint: SMTP user name
Use this setpoint to enter the user name for the SMTP server if SMTP
authentification is enabled.
Setpoint: SMTP password
Use this setpoint to enter the password for the SMTP server if SMTP
authentification is enabled.
To Next Page
Loading...
Need help?
General
